Demonology Implosion

Sequences[‘imps’] = {
author=“Ojoverde@Eldre’Thalas”,
specID=266,
version=1,
source = “Local”,
helpTxt = “Talents: 2312333”,
icon=‘INV_MISC_QUESTIONMARK’,
lang=“enUS”,
PreMacro=[[
/targetenemy [noharm][dead]
/petattack [@target,harm]
]],
“/cast [combat] Shadowflame”,
“/castsequence [combat] Call Dreadstalkers, Demonic Empowerment”,
“/castsequence reset=target Doom, Shadow Bolt”,
“/castsequence [combat] Summon Darkglare, Demonic Empowerment”,
“/castsequence [combat] Hand of Gul’dan, Demonic Empowerment, Life Tap”,
“/cast [nochanneling] Shadow Bolt”,
“/catsequence [combat] Grimoire: Felguard, Demonic Empowerment”,
“/castsequence [combat] Hand of Gul’dan, Demonic Empowerment, Implosion”,
“/cast [combat] Thal’kiel’s Consumption”,
PostMacro=[[
/use [combat]13
/use [combat]14
]],
}

I am playing warlock demonology with talents 2311333, Crit 17%, Haste 32%, Mastery 32%, manage to clear Emerald Nightmare with this macro, its based on summoning a lot of imps (no longer focused on dreadstalkers since changes on warlocks). Works well if you switch talents to shadowy inspiration or shadowflame, hand of doom or power trip, grimoire of service or grimoire of synergy, summon darkglare or demonbolt or soul conduit as long you do it in the gnomesequencer editor. It all depends on the raid encounter to make it cleave more or focus on single target.

I have put it in a black box for you.

Sequences[‘imps’] = {
author=”Ojoverde@Eldre’Thalas”,
specID=266,
version=1,
source = “Local”,
helpTxt = “Talents: 2312333″,
icon=’INV_MISC_QUESTIONMARK’,
lang=”enUS”,
PreMacro=[[
/targetenemy [noharm][dead]
/petattack [@target,harm]
]],
“/cast [combat] Shadowflame”,
“/castsequence [combat] Call Dreadstalkers, Demonic Empowerment”,
“/castsequence reset=target Doom, Shadow Bolt”,
“/castsequence [combat] Summon Darkglare, Demonic Empowerment”,
“/castsequence [combat] Hand of Gul’dan, Demonic Empowerment, Life Tap”,
“/cast [nochanneling] Shadow Bolt”,
“/catsequence [combat] Grimoire: Felguard, Demonic Empowerment”,
“/castsequence [combat] Hand of Gul’dan, Demonic Empowerment, Implosion”,
“/cast [combat] Thal’kiel’s Consumption”,
PostMacro=[[
/use [combat]13
/use [combat]14
]],
}

says some characters can not be converted says ansi latin

Quotations are wrong. Bsasically everything in White needs fixing :slight_smile:

Sequences[‘imps’] = {
author=“Ojoverde@Eldre’Thalas”,
specID=266,
helpTxt = “Talents: 2312333”,
icon=‘INV_MISC_QUESTIONMARK’,
PreMacro=[[
/targetenemy [noharm][dead]
/petattack [@target,harm]
]],
“/cast [combat] Shadowflame”,
“/castsequence [combat] Call Dreadstalkers, Demonic Empowerment”,
“/castsequence reset=target Doom, Shadow Bolt”,
"/castsequence [combat] Summon Darkglare, Demonic Empowerment’,
“/castsequence [combat] Hand of Gul’dan, Demonic Empowerment, Life Tap”,
“/cast [nochanneling] Shadow Bolt”,
“/catsequence [combat] Grimoire: Felguard, Demonic Empowerment”,
“/castsequence [combat] Hand of Gul’dan, Demonic Empowerment, Implosion”,
“/cast [combat] Thal’kiel’s Consumption”,
PostMacro=[[
/use [combat]13
/use [combat]14
]],
}

Sequences[‘imps’] = {
author=”Ojoverde@Eldre’Thalas”,
specID=266,
helpTxt = “Talents: 2312333”,
icon=’INV_MISC_QUESTIONMARK’,
PreMacro=[[
/targetenemy [noharm][dead]
/petattack [@target,harm]
]],
“/cast [combat] Shadowflame”,
“/castsequence [combat] Call Dreadstalkers, Demonic Empowerment”,
“/castsequence reset=target Doom, Shadow Bolt”,
“/castsequence [combat] Summon Darkglare, Demonic Empowerment’,
“/castsequence [combat] Hand of Gul’dan, Demonic Empowerment, Life Tap”,
“/cast [nochanneling] Shadow Bolt”,
“/catsequence [combat] Grimoire: Felguard, Demonic Empowerment”,
“/castsequence [combat] Hand of Gul’dan, Demonic Empowerment, Implosion”,
“/cast [combat] Thal’kiel’s Consumption”,
PostMacro=[[
/use [combat]13
/use [combat]14
]],
}

Still not working?

Sequences['imps'] = {
author="Ojoverde@Eldre’Thalas",
specID=266,
helpTxt = "Talents: 2312333",
icon='INV_MISC_QUESTIONMARK',
PreMacro=[[
/targetenemy [noharm][dead]
/petattack [@target,harm]
]],
"/cast [combat] Shadowflame",
"/castsequence [combat] Call Dreadstalkers, Demonic Empowerment",
"/castsequence reset=target Doom, Shadow Bolt",
"/castsequence [combat] Summon Darkglare, Demonic Empowerment",
"/castsequence [combat] Hand of Gul’dan, Demonic Empowerment, Life Tap",
"/cast [nochanneling] Shadow Bolt",
"/catsequence [combat] Grimoire: Felguard, Demonic Empowerment",
"/castsequence [combat] Hand of Gul’dan, Demonic Empowerment, Implosion",
"/cast [combat] Thal'kiel’s Consumption",
PostMacro=[[
/use [combat]13
/use [combat]14
]],
}

Fixed the quotations, should work for you now.

Sequences['imps'] = {
author="Ojoverde@Eldre’Thalas",
specID=266,
helpTxt = "Talents: 2312333",
icon='INV_MISC_QUESTIONMARK',
PreMacro=[[
/targetenemy [noharm][dead]
/petattack [@target,harm]
]],
"/cast [combat] Shadowflame",
"/castsequence [combat] Call Dreadstalkers, Demonic Empowerment",
"/castsequence reset=target Doom, Shadow Bolt",
"/castsequence [combat] Summon Darkglare, Demonic Empowerment",
"/castsequence [combat] Hand of Gul'dan, Demonic Empowerment, Life Tap",
"/cast [nochanneling] Shadow Bolt",
"/catsequence [combat] Grimoire: Felguard, Demonic Empowerment",
"/castsequence [combat] Hand of Gul'dan, Demonic Empowerment, Implosion",
"/cast [combat] Thal'kiel's Consumption",
PostMacro=[[
/use [combat]13
/use [combat]14
]],
}

Thx alot Cym :slight_smile:

I used this to get to 110 it’s been working really well for me.
The only issue i had with it was not the fault of the macro but just other lower level players who out DPS’d me in dungeons and can’t understand that due to instancing they are doing higher than i am.

Sadly that hidden artifact ability of secretly being kicked in dungeons has been left in by Blizzard :frowning:

Fresh 110 i was pulling around 100k DPS at 780 gear

https://postimg.org/image/431vse1d1/
https://s10.postimg.org/dnlif9qp5/error.png
can anyone help me … none of these macro’s respond?

i deleted the old folder of gnomesequencer and installed gnomesequencer enhanced and now none of the macro’s that are on this forum work properly with my level 100 warlock?
what am i doing wrong?
greetings

Not sure if this helps but how I do it is I copy and paste the macros from here to the appropriate class folder in the Mymacros folder thats in the addin for Gnomesequencer Enhanced. Which if you didn’t download for GS-E it’s right HERE

Then when I go in game I type /console reloadui then /gs and then it shows up in that characters macro’s.

I find that shadowflame is not a very good talent to use with a macro. For it to work well it needs to be cast every 6 seconds or so and not sooner. It has 3 charges so you will go through all your charges right away and then the dot will fall off. The only way shadowflame is better is if you can constantly keep the dot up, which requires it to be manually cast.

I took out Shadowflame and used Shadowy Inspiration instead and I feel that’s much better for using a macro.

Thanks for the macro! Not trying to critique or anything, just wanted to share a bit of knowledge about how the skill works.

well iam doing 66k dps on dungeon dummy with ilvl 813 gear… so how much dps are u guys doing lol …

almost never cast hand of guldan either

[quote quote=34397]I find that shadowflame is not a very good talent to use with a macro. For it to work well it needs to be cast every 6 seconds or so and not sooner. It has 3 charges so you will go through all your charges right away and then the dot will fall off. The only way shadowflame is better is if you can constantly keep the dot up, which requires it to be manually cast.
I took out Shadowflame and used Shadowy Inspiration instead and I feel that’s much better for using a macro.
Thanks for the macro! Not trying to critique or anything, just wanted to share a bit of knowledge about how the skill works.
[/quote]

/castsequence reset=6 shadowflame, void

this should result in a minimum delay of 6 seconds between casts.

This macro is rly good - doying a good dps with it - stats:

GS: 840
Intellect: 19137
Crit 17.85%
Haste 24.94%
Mastery 32.36%
Leech 1.76%
Versatility 2.84%

2 min. damage test on dungeon-dummy: 125-131k dps (unbuffed/no food/no runes/ only 2 relicts on weapon etc)

I tried a lot on dummy and changed some talents into 2312332 - so actually i only change the last one into demonbolt. This macro is producing so much imps - thats great for demonbolt.

Shadowflame is … i dont know - the macro put it on a target but not the way it should be :confused:
You allready wrote something like

/castsequence reset=6 shadowflame, void

but i actually have no idea where to put it into the macro or what I should do with it xD
Would be nice if you could help me ^^

BUT all in all its a great macro - like it cause i like to bomb this imps away xD

[quote quote=34585]

I find that shadowflame is not a very good talent to use with a macro. For it to work well it needs to be cast every 6 seconds or so and not sooner. It has 3 charges so you will go through all your charges right away and then the dot will fall off. The only way shadowflame is better is if you can constantly keep the dot up, which requires it to be manually cast. I took out Shadowflame and used Shadowy Inspiration instead and I feel that’s much better for using a macro. Thanks for the macro! Not trying to critique or anything, just wanted to share a bit of knowledge about how the skill works.

/castsequence reset=6 shadowflame, void this should result in a minimum delay of 6 seconds between casts. [/quote] From what I understand with these type of /castsequence reset=6 is that the timers do not work anymore. Can anyone confirm this? I feel like there is so much uncertainty about how these macros work anymore. I've read this from multiple people, but I still see the timers in a lot macros.