anyone have a good dps lazy macro for ret pally 5.3 for Macrotoolkit add on?
Hi,
Not perfect but seems to work for me someone might wanna rejig it to suit…but hopefully will help you out.
On my main hotbar :-
/targetenemy [noharm]
/castsequence [combat] reset=0.3 0,0,0,0,0,Templar’s Verdict
/castsequence reset=0.3 0,0,0,0,Crusader Strike
/castsequence [combat] reset=0.3 0,0,0,Exorcism
/castsequence [combat] reset=0.3 0,0,Templar’s Verdict
/castsequence reset=0.3 0,Hammer of Wrath
/castsequence reset=5 Judgment,Judgment,Inquisition,Judgment,Judgment
/cast [combat] Avenging Wrath
/use [combat] 13
/use [combat] 14
/use [combat] 10
/swapactionbar 1 3
/startattack
And on hotbar 3 I place the following macro in the same slot as the above :-
/targetenemy [noharm]
/castsequence [combat] reset=0.3 0,0,0,0,Templar’s Verdict
/castsequence [combat] reset=0.3 0,0,0,Sacred Shield
/castsequence [combat] reset=0.3 0,0,Divine Protection
/castsequence [combat] reset=0.3 0,Holy Prism
/swapactionbar 3 1
/startattack
I did try and make it all one macro but I found that splitting it I actually up’d the dps I’ve repeated Templars Verdict as I want that firing off when its up.
Below is what I currently use for AoE fights :-
/targetenemy [noharm]
/castsequence [combat] reset=0.3 0,0,0,0,Hammer of the Righteous
/castsequence [combat] reset=0.3 0,0,0,Divine Storm
/castsequence [combat] reset=0.3 0,0,Exorcism
/castsequence reset=0.3 0,Hammer of Wrath
/castsequence reset=5 Judgment,Judgment,Inquisition,Judgment,Judgment
/cast [combat] Avenging Wrath
/use [combat] 13
/use [combat] 14
/use [combat] 10
/swapactionbar 1 3
/startattack
And as above on Bar 3 :-
/targetenemy [noharm]
/castsequence [combat] reset=0.3 0,0,0,0,Divine Storm
/castsequence [combat] reset=0.3 0,0,0,Sacred Shield
/castsequence [combat] reset=0.3 0,0,Divine Protection
/castsequence [combat] reset=0.3 0,Holy Prism
/swapactionbar 3 1
/startattack
I went for Holy Prism as I find AoE fights don’t last long nowadays and Execution was just too long in refreshing anyway each to there own let us know how it pans out 
Dave
I do not know what that addon is. And really nothing has changed for us in 5.3.
My talents are 2,3,3,2,2,3
My single target is
/castsequence reset=0.3 2,2,2,2,2, judgment
/castsequence reset=0.3 2,2,2,2, crusader strike
/castsequence reset=0.3 2,2,2, templar’s verdict
/castsequence reset=0.3 2,2, exorcism
/castsequence reset=0.3 2, execution sentence
/cast hammer of wrath
/use 14
Its almost perfect. I have Inquisition on a different button, and i refresh it when i have less than 4 seconds left. Like i said its nearly perfect. It does cast ES with out Inquisition up at the pull.
/castsequence reset=0.3 2,2,2,2,2, judgment
/castsequence reset=0.3 2,2,2,2, hammer of the righteous
/castsequence reset=0.3 2,2,2, divine storm
/castsequence reset=0.3 2,2, exorcism
/castsequence reset=0.3 2, execution sentence
/cast hammer of wrath
My aoe version.
/castsequence [combat] reset=0.3 0,0,0,0,0,Holy Avenger
/castsequence reset=0.3 0,0,0,0,Crusader Strike
/castsequence reset=0.3 0,0,0,Exorcism
/castsequence reset=0.3 0,0,Templar’s Verdict
/castsequence reset=0.3 0,Hammer of Wrath
/castsequence reset=5 Judgment,Judgment,Inquisition,Judgment
/cast [combat] Avenging Wrath
/use Kafa Press
/startattack
How are you getting macros to use TV? I haven’t had a macro use it. It just circles around 5 HP till it is time to refresh Inq
Ive tried the above macros as they are and none of them are firing Templar’s Verdict.
Hello Briston and Steve, perhaps is a type bug that we have encountered before with abilities that have apostrophes “’”. When you copy from the site and paste it into the game it looks fine but the type of character it uses on the game seems to be different.
An easy fix is to delete this ability and shift click from the spell book to link it inside the macro or type the ability yourself in the game after deleting this portion.
[quote quote=7355]Hello Briston and Steve, perhaps is a type bug that we have encountered before with abilities that have apostrophes “‘”. When you copy from the site and paste it into the game it looks fine but the type of character it uses on the game seems to be different.
An easy fix is to delete this ability and shift click from the spell book to link it inside the macro or type the ability yourself in the game after deleting this portion.
[/quote]
Excellent, that fixed it! thank you very much!
Hmmm, TV is working, but now Judgment is not, ive even deleted and retyped the line, which is odd as it was working before I fixed TV.
What macro are you using Steve? I am trying to work out a new macro, but am having some trouble with the format
Still using this one. Works like a charm. Toon is Guru on Earthen Ring if you want to match talents.
/castsequence [combat] reset=0.3 0,0,0,0,0,Holy Prism
/castsequence reset=0.3 0,0,0,0,Crusader Strike
/castsequence reset=0.3 0,0,0,Exorcism
/castsequence reset=0.3 0,0,Hammer of Wrath
/castsequence reset=0.3 0,Templar’s Verdict
/castsequence [mod]Emancipate;reset=target/6 Judgment,Inquisition
/cast [combat] !Avenging Wrath
/cast [combat] !Guardian of Ancient Kings
/cast [combat] !Divine Protection
/cast [combat] !Devotion Aura
/targetenemy [noharm][dead]
Here is the one I am working on. It is a modification to a macro someone else listed. The character is Briston on Runetotem if you want to look it up.
/castsequence [combat] reset=0.3 0,0,0,0,0,0,0,Avenging Wrath
/castsequence reset=0.3 0,0,0,0,0,0,Guardian of Ancient Kings
/castsequence reset=0.3 0,0,0,0,0,Execution Sentence
/castsequence reset=0.3 0,0,0,0,Hammer of Wrath
/castsequence reset=0.3 0,0,0,Crusader Strike
/castsequence reset=0.3 0,0,Hammer of Wrath
/castsequence reset=0.3 0,Templar’s Verdict
/castsequence reset=5 Judgment,Judgment,Inquisition,Judgment
/cast [combat] Avenging Wrath
/startattack
[quote quote=6927]I do not know what that addon is. And really nothing has changed for us in 5.3.
My talents are 2,3,3,2,2,3
My single target is
/castsequence reset=0.3 2,2,2,2,2, judgment<br>
/castsequence reset=0.3 2,2,2,2, crusader strike<br>
/castsequence reset=0.3 2,2,2, templar’s verdict<br>
/castsequence reset=0.3 2,2, exorcism<br>
/castsequence reset=0.3 2, execution sentence<br>
/cast hammer of wrath<br>
/use 14
Its almost perfect. I have Inquisition on a different button, and i refresh it when i have less than 4 seconds left. Like i said its nearly perfect. It does cast ES with out Inquisition up at the pull.
/castsequence reset=0.3 2,2,2,2,2, judgment<br>
/castsequence reset=0.3 2,2,2,2, hammer of the righteous<br>
/castsequence reset=0.3 2,2,2, divine storm<br>
/castsequence reset=0.3 2,2, exorcism<br>
/castsequence reset=0.3 2, execution sentence<br>
/cast hammer of wrath
My aoe version.
[/quote]
I am attempting to use this version, at first TV wasnt firing, but then as Luis suggested I retyped the macro and pasted the ability from the spellbook, now Judgment isnt firing at all. The rest are.
Make sure you have a seal active.
this is what I’m using. I got it from someone else (Micheal jackson but not sure), but, It’s been working for me. It’s a multi-button instead of the usual one button macro.
my talents are long arm of the law, fist of justice, sacred shield, clemency, holy avenger, and execution sentence. I Primarily pvp in this spec so i mostly have Malv gear, but, on the dummy im avg around 45k dps sustained. TV does fire off and have gotten 120k+ crits with it. You can armory my toon Faod on Mok’nathal for glyphs and what not.
Button 1
/castsequence [mod,@player]Execution Sentence;reset=5 Sacred Shield,Judgment,Crusader Strike,Inquisition,Judgment,Crusader Strike
/castsequence reset=0.3 0,Templar's Verdict
/castsequence reset=0.3 Exorcism
/cast [combat]Avenging Wrath
/cast [combat]Divine Protection
/cast [combat]Guardian of Ancient Kings
/cast [combat]holy avenger
/use [combat]13
/swapactionbar 1 2
/startattack
Button 2
/castsequence [mod,@player]Execution Sentence;reset=0.3 1,Exorcism
/castsequence [combat]reset=0.3 Execution Sentence
/use [combat]13
/swapactionbar 2 3
Button 3
/castsequence reset=target Hammer of Wrath
/swapactionbar 3 1
I also have an AoE one as well but can’t seem to get Divine storm to fire off.
Anywho hope this works
These are the Ret Pally macros I’m using at the moment.
#showtooltip Crusader Strike
/castsequence [nocombat]reset=0.6 0,0,0,0,0,0,Word of Glory
/castsequence [combat]reset=0.6 0,0,0,0,0,Execution Sentence
/castsequence reset=0.6 0,0,0,0,Crusader Strike
/castsequence [mod]Flash of Light;reset=0.6 0,0,0,Exorcism
/castsequence reset=0.6 0,0,Templar's Verdict
/castsequence reset=0.6 0,Hammer of Wrath
/castsequence reset=5 Judgment,Judgment,Inquisition,Judgment
/use [combat]Avenging Wrath
/use [combat]Divine Protection
/use [combat]Devotion Aura
/use [combat]Guardian of Ancient Kings
/use [combat]13
/use [combat]14
/use [combat]Lifeblood
/startattack
and AOE
#showtooltip Crusader Strike
/castsequence [nocombat]reset=0.6 0,0,0,0,0,0,Word of Glory
/castsequence [combat]reset=0.6 0,0,0,0,0,Execution Sentence
/castsequence reset=0.6 0,0,0,0,Hammer of the Righteous
/castsequence [mod]Flash of Light;reset=0.6 0,0,0,Exorcism
/castsequence reset=0.6 0,0,Divine Storm
/castsequence reset=0.6 0,Hammer of Wrath
/castsequence reset=5 Judgment,Judgment,Inquisition,Judgment
/use [combat]Avenging Wrath
/use [combat]Divine Protection
/use [combat]Devotion Aura
/use [combat]Guardian of Ancient Kings
/use [combat]13
/use [combat]14
/use [combat]Lifeblood
/startattack
They work fine, and pop all my cooldowns, but you can easily edit those out.
Stan -
I like your macros I use them for my Pally, but for the life of me I can’t figure out which spell is doing a ground target. Which ever spell that is should be removed to be honest.
Also I think overall we can remove Devotion Aura and Divine Protection out of the macros as they are more used when you are in danger.
[quote quote=9363]Stan -
I like your macros I use them for my Pally, but for the life of me I can’t figure out which spell is doing a ground target. Which ever spell that is should be removed to be honest.
Also I think overall we can remove Devotion Aura and Divine Protection out of the macros as they are more used when you are in danger.
[/quote]
Ret does not have a ground target, Protection has one IF you have it glyphed, and that is Consecration. Agree should pull out DA and DP, wasting globals. Stans macro is not really for anyone wanting to put up significant numbers. Looks more like a questing macro or some such, with WOG in it ect, if you are using for that keep DP in.
I do not prefer these long macros that bind everything into one button. I think most people here pull out junk and just use the meat and potatoes of the macros. The problem is using macros like this is you have less control over what happening with your toon if something unexpected happens.
I posted my macro a while back and still works great, its small it under 255 and does the primary rotation minus our maintenance Inquisition, which coming in 5.4 will last 1 min. The real problem is if you get the new 4 piece tier set in 5.4, you will have to DS unbound on another button or [mod]x; command it since it it like our old ICC tier set with a free DS on proc.
I run a 519 ilvl ret and easily push 140 sustained and burst is over 250k, comparable with any decent player using Spellflash or CLCRet addons, just using my macro, a keen eye in Inquisition and smart use of my CDs.
Anyone have one for leveling 85 on? Sorry if there is one posted for this, can’t really see it on my phone atm.
There are many options to chose from here. If you want a small lightweight damage only 1 button macro i suggest using mine. It is less than 255 so no need to use a macro extender.
/castsequence reset=0.3 2,2,2,2,2, judgment
/castsequence reset=0.3 2,2,2,2, crusader strike
/castsequence reset=0.3 2,2,2, templar’s verdict
/castsequence reset=0.3 2,2, exorcism
/castsequence reset=0.3 2, execution sentence
/cast hammer of wrath
/use 14
You can take out Execution Sentence if you like or swap that with Holy Prism once you hit 90.
For a aoe version just swap out Crusader Strike and Templar’s Verdict with the aoe versions.