This seems like a really powerful sequence! For some reason when I keybind and run it, after like 30 sec at the dummies it disconnects me from game. Never had that issue before with a sequence. Any ideas why?
Ive never had that problem, no sorry.
Hey, Flipcyde. Great sequence.
Man, I got fantastic performance with the first sequence.
I’m not sure exactly what’s going on with the second one, but when testing on dummies and in a few instances, I got significantly better performance with V1.
v3: 2 min on dummies, 256.3k
v1: 2 min on dummies, 297.3k
Same stats, buffs e equips (4p TIER)
ALTAR of fangs 10 with v1
1 Like
Do you guys just spam the keybind or use ahk with delay for it to work? Because mine doesn’t seem to work it gets stuck (ST one)
Not allowed to talk about “MS” on the site
3 Likes
can you reshare v1 with me so I can test it?
V1 Date: 09/06/2026/16:46
!GSE3!xVZNb9tGEK3a9MtA7/247KE5VZYlxTCC5FKFpCRaFGmItCQjCIgVORIXXu4yu0ulAnJwf0rrXAv0z/Sn5FigQzq2FaDyyYF10WB2l+/NvNmZ/XNQ0A2XNH3nTqlidMFBX/THNFFSX3gOhxyEsWQpTMMN4XUJIgH9x/ynvueeWGe2E78Yx2PX9t3BMIp7gRNPO+/cGdDzXqmovhhOQWkmhf79ctBLTG391bh08gpgfnpQgKFaM232atMYmpyTl78aqlZgmhlVeVPIFGj6au9AG1nU58jLJKNCAGdihf6EakNmjKckyhAzs6NNAf0rNNugfYX2+TXq9P5QR4xzYsk8pyLdAfvFJwj2BVULSEmYSbMD9dE16uweUUEbRjmZKWp2JfnLB5H2q4eR9usHkfabB5L222vc6P5wbaYAwdHcAbr3CUAtuVD0rgzXbtuTsuhPoABqGl5ooOiXot45PFFMKmY2J65YlIyb28bpeHQBfP54zFLBVpkhIcYmBemSaYe8JT3pkO4vJKop65GHbE6LlBpI/W67e9R+2jlq17/hGCO0qaF/D60MknNd5qN159nhov2EHh61J1XnDWWpEtheXi6AQvfwqX+77NMc/KpXV326bs9HkSOWsjop8wIRFoxjKO8HQ+BF9Js5a7z6X/LmjdwveKn3r/JNig85IIlU0Nq+o82Prk5zu6IJOj6uNaIgAbYG/K8SjftQWMgLo59v6USYJiYDwuUbPLx/g72kjO+bTMlylbWIRRFWLuudFZ8mMYqJc8x0kzBhQKmyqOwUliA0gqKdy3U94dDLdAFc1xRxyFUTDxQpTZ0epJdTJghGVFLeIiHWH0tIp9vqkARPsErE50ThIZYDWVNeebBWKuYCA0gw2RwMtPq90mRSzfqcFckmBXJATibBsWNFpFLteBA6H0bmD989moxrPLeiskaW6H1vV5LeOX9HlX8CHNWD6GYtdHph4Mdd3DCwYUlLjhM9UGzFxAg28yd3fPDtDrKejaKJFLPFQF9ePxq23hG3L4aLflhA4trf/2tFgfXjZ41/fq6rdHqTqTkJo17kWnHge2dxpxt34smpH7ljJ/aDqLLrG3psBZ6HBNzA/w8=
Note:
Unless otherwise stated RECOMMENDED Talents can be found at the links below:
Refer to: Wowhead | Icy-Veins | Archon | MaxRoll
Thank you,
Flipcyde / PROJECT CYDE
This package consists of 1 elements.
Sequences
- FLIPCYDE_BM_MIDNIGHT_AOE_V1
1 Like
September 3 testing update
Quick catch-up for everyone following the sequence here. The published versions remain ST V1 and AoE V3. This is a testing update, not a new import, so there’s nothing new to download.
The ST compatibility correction only changed its export metadata, not the rotation. AoE V3 was revised to get Barbed Shot ahead of the first Kill Command for Nature’s Ally, establish Beast Cleave early, and give Cobra Shot more opportunities while maintaining smooth casting.
Following feedback that the original AoE V1 performed better for one player, I reviewed the development logs and completed three additional V3-only two-minute tests.
All three opened with Barbed Shot followed by Wild Thrash, and the first Kill Command benefited from Nature’s Ally. None showed a prolonged lockup. However, recorded Beast Cleave coverage was 86.9%, 87.7%, and 69.3%. In the third run, Wild Thrash was delayed while other abilities continued casting. Early Bestial Wrath timing also varied.
That consistency is what needs further investigation. My Hunter currently has two-piece, so these tests do not validate four-piece performance or prove V3 is better than the original V1. My current gear and talents also differ from the earlier development tests.
The goal is to retain the corrected opener without sacrificing sustained AoE damage. No revised sequence is being released with this update.
If you’re testing either version, please include the exact sequence name, GSE version, talents, tier-piece count, target count, and combat logs if available. Feedback is welcome here too.
Thanks for helping test it!
1 Like
Thanks for testing both versions and sharing the breakdowns. I’ve gone back through the development logs and just completed three more two-minute AoE V3 tests.
The original correction was intended to get Barbed Shot out before the first Kill Command so it benefits from Nature’s Ally, while establishing Beast Cleave early and keeping the sequence flowing. The selected version did that in all five development tests and averaged higher damage than our development control. That’s why I chose it for release.
The latest tests confirmed that opener correction, but they also revealed inconsistent Beast Cleave coverage. Uptime was around 87% in the first two runs, then dropped to 69% in the third because Wild Thrash was being delayed while other spells kept casting. The sequence wasn’t locking up, but that is something worth addressing.
My Hunter still has two-piece, so I can’t claim these results settle how it performs with your four-piece. The earlier comparison was also against our development control, not directly against the original public V1. Your feedback deserves a proper comparison rather than being dismissed as RNG.
Could you share your talent export, dummy target count, and combat logs if available? Also, could you confirm which screenshot belongs to each version? The filenames appear reversed relative to the captions.
I appreciate you flagging this. I want to retain the corrected opener without sacrificing sustained AoE damage. I plan to focus more on my hunter in the next couple weeks so ill see what I find on my end as well.
Cheers!
1 Like
Hi there, how about Hunter’s Mark, we supposed to use manually only on bosses, not worth to integrate? Thanx.
Ok @Flipcyde ,
I’ll likely be able to rerun the tests tomorrow, since I’ve swapped out some Tier pieces and other gear.
1 Like
When i try to import into GSE it says the macro was created on an older version. How can i give this a try in the version i have?
Hunters mark only on our prio. I dont waste GCD’s or focus on the every mob I target must get my mark mentality. I left it maual for that reason.
What version GSE you running? It should be good to upload either way. I can work a fix out if it’s blocking you.
Hi Flip, i am running 3.3.32. I get a message that this macro was created in an earlier version and may not import correctly. Then it wont go any further from there. Thanks for any assistance.