Hey! I have absolutely loved your sequences! So thank you, first of all 
I am trying out Druid of the Claw for the first time, due to the current tuning of it, I usually roll with Elune’s. I have noticed that Ravage and Raze are rarely used…probably due to the key spam…I have to try and manually press both…but when they are up, I don’t often have the chance to manually cast those abilities before I am out of rage. Those 2 abilities are the primary overtuned ones for the current Druid of the Claw tuning as far as my understanding goes.
UPDATE - I attempted to slow my MS down on my mouse, and Ravage/Raze doesn’t get used even once, unless I manually cast it. I did double check that Raze is in the sequence, and it is there…just not being used. It might be due to the Iron fur taking up the rage before it has a chance to use it on raze or ravage. EDITED UPDATED - I realized that Ravage replaces Maul, but Maul isn’t listed in the sequence, so that’s likely why it isn’t being used, but Raze is still in there.
Have 2 guardians- one alliance and one horde- and been doing a lot of dungeons trying to catch up. Sequence works great- thanks for all you do. When you get some time maybe update the tree once you have figured out what talents work best with the macro.
On my end Raze still works.
I am guessing its due to haste values and how much rage you gain per cycle.
In the block with
/castsequence Ironfur, Ironfur, Raze
Just remove one Ironfur and save the sequence and that should fix it. The sequence is on the conservative side trying to maintain 2 stacks of IF before using any rage on damage. You might want to test and see how many stacks it maintains with this change. Personally I’d rather have the IF stacks then raze but it does limit the amount of damage. On top of that there is a no raze build going around with insane single target damage that will get nerfed and I’m waiting to see how that goes before putting in much more testing.
silly question, whats the moonspam macro? i am unable to find it in my macros
nvm got it
Hopped on my druid since it looks like they’re the best tank now. Gotta say, already pretty busted.
FYI - As of 18:00 (EST) 20FEB2026, talents will not import as they are out of date.
Ive been using druid GSE for ages now and this one isnt working for me properly.
IT doesn’t cast iron fur and it doesnt use maul/ravage.
What am i doing wrong, EC ones work fine
Try reimporting it. Works fine on my end. Near constant IF 2 stack uptime and great dps
Hello there! I am having troubles with implementing your macro. When I copy paste macro into gse it reads it correctly but when I press import there is a error : “Sequence named GH_DOTc was not specifically designed for this version of the game. It may need adjustments”. Is that an macro fault or my addons? Other creators macros works for me fine. Thank you very much in advance and i appreciate your work!
It’ll sort itself in the coming days. Release was only last night for Midnight so itll take a few days for addons etc to catch up
I use Elune and it has been working perfectly in all content using wowhead and icyveins talent trees- never been a DoTC fan except for ST in raids, and I don’t raid much- personally do M+. Maybe use that for now until @Hermit gets a chance to work on his level 90 macros?
Sorry, guys, I got a bit of a late start on the expansion, as my life’s been a bit hectic.
I’ve been writing a book on systemizing logic for metaphysical/ethics philosophy, and while it’s going well, I had to write nearly 80 pages of derivations. Then, the day before early access, I had a dream that pressure and temperature might be a duality of the same thing and could be represented as a field. The implications would have been pretty big, as it would solve a lot of issues in cosmology. So I spent most of the week writing out the field equations and running publicly available data through Python to test it. Unfortunately, it didn’t work—but it’s better to know now than later. Just to give you guys an idea, it was a ton of fun.
The formatting is wonky; you can copy and paste it into LaTeX to see the actual formulas.
Field:
Φ:R3×R→R (or C)\Phi: \mathbb{R}^3 \times \mathbb{R} \to \mathbb{R} \text{ (or } \mathbb{C}\text{)}Φ:R3×R→R (or C)∂tΦ,∇Φ,arg(Φ) if complex\partial_t \Phi, \quad \nabla \Phi, \quad \arg(\Phi) \text{ if complex}∂tΦ,∇Φ,arg(Φ) if complex
Lagrangian Density:
L[Φ]=12gμν(∇μΦ)(∇νΦ)−V(Φ),V(Φ)=m22Φ2+λ4Φ4+…\mathcal{L}[\Phi] = \frac{1}{2} g^{\mu\nu} (\nabla_\mu \Phi)(\nabla_\nu \Phi) - V(\Phi), \quad V(\Phi) = \frac{m^2}{2} \Phi^2 + \frac{\lambda}{4} \Phi^4 + \dotsL[Φ]=21gμν(∇μΦ)(∇νΦ)−V(Φ),V(Φ)=2m2Φ2+4λΦ4+…
Field Equation:
□gΦ+dVdΦ=0,□g=gμν∇μ∇ν\square_g \Phi + \frac{dV}{d\Phi} = 0, \quad \square_g = g^{\mu\nu} \nabla_\mu \nabla_\nu□gΦ+dΦdV=0,□g=gμν∇μ∇ν
Curvature coupling:
□gΦ+dVdΦ=λRΦ\square_g \Phi + \frac{dV}{d\Phi} = \lambda R \Phi□gΦ+dΦdV=λRΦ
Weak-field limit:
(∂t2−∇2)Φ+V′(Φ)=0(\partial_t^2 - \nabla^2) \Phi + V’(\Phi) = 0(∂t2−∇2)Φ+V′(Φ)=0
Energy-Momentum Tensor:
Tμν[Φ]=∇μΦ∇νΦ−gμνL[Φ],∇μTμν=0T_{\mu\nu}[\Phi] = \nabla_\mu \Phi \nabla_\nu \Phi - g_{\mu\nu} \mathcal{L}[\Phi], \quad \nabla^\mu T_{\mu\nu} = 0Tμν[Φ]=∇μΦ∇νΦ−gμνL[Φ],∇μTμν=0
Conserved Currents (Noether):
Time translation: Atotal=∫T00 d3xA_\text{total} = \int T_{00} \, d^3xAtotal=∫T00d3x
Spatial translation: momentum
Rotational invariance: angular momentum
Phase invariance (if complex Φ\PhiΦ):
Jμ=i(Φ∗∇μΦ−Φ∇μΦ∗)J^\mu = i (\Phi^* \nabla^\mu \Phi - \Phi \nabla^\mu \Phi^*)Jμ=i(Φ∗∇μΦ−Φ∇μΦ∗)
Boundary and Initial Conditions:
Φ(x,0),∂tΦ(x,0),Φ→Φ∞ as ∣x∣→∞\Phi(x,0), \quad \partial_t \Phi(x,0), \quad \Phi \to \Phi_\infty \text{ as } |x| \to \inftyΦ(x,0),∂tΦ(x,0),Φ→Φ∞ as ∣x∣→∞
Linear Stability (around Φ0\Phi_0Φ0):
Φ=Φ0+δΦ⇒□gδΦ+V′′(Φ0)δΦ=0\Phi = \Phi_0 + \delta \Phi \quad \Rightarrow \quad \square_g \delta \Phi + V’'(\Phi_0) \delta \Phi = 0Φ=Φ0+δΦ⇒□gδΦ+V′′(Φ0)δΦ=0
V′′(Φ0)>0⇒V’'(\Phi_0) > 0 \RightarrowV′′(Φ0)>0⇒ stable
V′′(Φ0)<0⇒V’'(\Phi_0) < 0 \RightarrowV′′(Φ0)<0⇒ instability → nonlinear solutions
However if:
□Φ+V′(Φ)=0Then:
Static solutions in 3D fall like 1/r1/r1/r
Energy density falls like 1/r41/r^41/r4
Meaning: It will not give flat rotation curves without modification.
But since that didn’t work I finally started playing it might take a couple of days to catch up though.
6 Likes
wow u have been busy buddy and that stuff i wouldnt even no were to start i stick to ya fantastic macros instead lol
So leveled a 80-90 with your bear build (DotC), sitting at 221 ilvl now pulling heroics 3-5 packs, only change i made was changing Raze in the macro to Maul, and its been night and day difference, noticed a lot of downtime originally on IF but doing this change seems the reset the castsequence (or let it run through the castsequence better) i originally took one ironfur out, but made no difference so I added the 2 IF then Maul and seems to run very smooth, caps Rage a little bit but not often.
These ST and AoE are very consistent across most dungeons, seen 150k on an AoE pull.
2 Likes
could i get your talents?
CgGA8cL7tpvige+kkmGM9zUPWDAAAAAAAAAAAgZmxsMzYMWMLzMPgZZZgZzwoJamZWmZmZmlxMMAAAAAghlZAAAAomZZWmZmBAwCmZAWYwgBLbDAmZB+A
I add his MOONSPAM in now as well
How do you add this moonspam macro? Bit new to this tbh. Also I dont see any renewal spell in my book but the sequence has it included, is this because the sequence is not updated yet to current wow?
Do you mind sharing your sequence? 
GSE doesn’t allow to replace Raze my Maul weirdly. Everytime I do the change, save, boom: back to Raze. I guess it’s due to the fact the spell itself is replaced in the spellbook?
Yes, this is what I found to be the case as well