# Grizzly Hermit v5.2.3 Updated 10/28 **URL:** \ **Category:** Patch 11.0+\ **Tags:** the-war-within, patch-11-0\ **Created:** [July 24, 2024, 10:02am UTC](https://wowlazymacros.com/t/grizzly-hermit-v5-2-3-updated-10-28/41999 "2024-07-24T10:02:05Z")\ **Posts on this page:** 20\ **Page:** 9
**Author:** ![Caveman1](https://wowlazymacros.com/user_avatar/wowlazymacros.com/caveman1/32/5118_2.png) [@Caveman1](https://wowlazymacros.com/u/Caveman1)\ **Post date:** [October 22, 2024, 5:32pm UTC](https://wowlazymacros.com/t/grizzly-hermit-v5-2-3-updated-10-28/41999/169 "2024-10-22T17:32:07Z")
ILl do some testing tonight kudos \<3 ---
**Author:** ![Hermit](https://wowlazymacros.com/user_avatar/wowlazymacros.com/hermit/32/20606_2.png) [@Hermit](https://wowlazymacros.com/u/Hermit)\ **Post date:** [October 24, 2024, 10:32am UTC](https://wowlazymacros.com/t/grizzly-hermit-v5-2-3-updated-10-28/41999/170 "2024-10-24T10:32:36Z")
Ok tested in a +10 Dawnbreaker and the swapping to bear from flightform or mount is much better. I think I’ll push the build in a day or two unless others think there is something else that needs improvement. ---
**Author:** ![ariel\_perera](https://wowlazymacros.com/user_avatar/wowlazymacros.com/ariel_perera/32/22197_2.png) [@ariel\_perera](https://wowlazymacros.com/u/ariel_perera)\ **Post date:** [October 24, 2024, 11:56am UTC](https://wowlazymacros.com/t/grizzly-hermit-v5-2-3-updated-10-28/41999/171 "2024-10-24T11:56:47Z")
Hey thank you for all your work when do you think you will finish with st build after patch ---
**Author:** ![Hermit](https://wowlazymacros.com/user_avatar/wowlazymacros.com/hermit/32/20606_2.png) [@Hermit](https://wowlazymacros.com/u/Hermit)\ **Post date:** [October 24, 2024, 5:18pm UTC](https://wowlazymacros.com/t/grizzly-hermit-v5-2-3-updated-10-28/41999/172 "2024-10-24T17:18:15Z")
I’ll push all changes to single target, off tank and M+ by Mon at the latest. ---
**Author:** ![Firedevil](https://wowlazymacros.com/letter_avatar_proxy/v4/letter/f/41988e/32.png) [@Firedevil](https://wowlazymacros.com/u/Firedevil)\ **Post date:** [October 24, 2024, 10:53pm UTC](https://wowlazymacros.com/t/grizzly-hermit-v5-2-3-updated-10-28/41999/173 "2024-10-24T22:53:47Z")
Im going to be trying yours tonight. Does it have cds and barkskin in it or those all manual or mods? ---
**Author:** ![Hermit](https://wowlazymacros.com/user_avatar/wowlazymacros.com/hermit/32/20606_2.png) [@Hermit](https://wowlazymacros.com/u/Hermit)\ **Post date:** [October 24, 2024, 11:04pm UTC](https://wowlazymacros.com/t/grizzly-hermit-v5-2-3-updated-10-28/41999/174 "2024-10-24T23:04:10Z")
It depends on the version used. - Sequence 3 doesn’t use Barkskin - Sequence 2 is used for the preferred M+ build and uses Barkskin. - Sequence 1 is used for any Raze builds and uses Barkskin (I wouldn’t suggest using this one.) Outside of that you need to use Incarn, Lunarbeam and Rage of the sleeper manually as you can’t just spam them on cooldown. Likewise your defensive defenses are not used such as SI, FR, renewal etc. The only thing this macro does is use thrash, mangle, moonfire, and ironfur (as well as raze and maul in certain versions.) ---
**Author:** ![Firedevil](https://wowlazymacros.com/letter_avatar_proxy/v4/letter/f/41988e/32.png) [@Firedevil](https://wowlazymacros.com/u/Firedevil)\ **Post date:** [October 24, 2024, 11:34pm UTC](https://wowlazymacros.com/t/grizzly-hermit-v5-2-3-updated-10-28/41999/175 "2024-10-24T23:34:45Z")
Certain ms you have this set for? 250 or less just wondering ---
**Author:** ![Firedevil](https://wowlazymacros.com/letter_avatar_proxy/v4/letter/f/41988e/32.png) [@Firedevil](https://wowlazymacros.com/u/Firedevil)\ **Post date:** [October 25, 2024, 12:49pm UTC](https://wowlazymacros.com/t/grizzly-hermit-v5-2-3-updated-10-28/41999/176 "2024-10-25T12:49:58Z")
Works great only thing i would change is barksin out of rotation and just on use for when needed ---
**Author:** ![nukester](https://wowlazymacros.com/user_avatar/wowlazymacros.com/nukester/32/11396_2.png) [@nukester](https://wowlazymacros.com/u/nukester)\ **Post date:** [October 25, 2024, 5:01pm UTC](https://wowlazymacros.com/t/grizzly-hermit-v5-2-3-updated-10-28/41999/177 "2024-10-25T17:01:12Z")
I don’t even use the single target, the MT macro serves all my needs. Great job. It’s smooth. ---
**Author:** ![Silverwebb](https://wowlazymacros.com/user_avatar/wowlazymacros.com/silverwebb/32/299_2.png) [@Silverwebb](https://wowlazymacros.com/u/Silverwebb)\ **Post date:** [October 26, 2024, 6:38pm UTC](https://wowlazymacros.com/t/grizzly-hermit-v5-2-3-updated-10-28/41999/178 "2024-10-26T18:38:39Z")
thanks for this. only problem is talents, ST, Raid, M+ etc kept saying out of date and unable to import. can you update those? something changed on those talents from wowhead. ![Screenshot 2024-10-26 143747](https://wowlazymacros.com/uploads/default/original/3X/3/c/3cb4e1dab334efa53a54b349c6557ac3dcf37268.png) ![Screenshot 2024-10-26 143719](https://wowlazymacros.com/uploads/default/original/3X/f/c/fc8441b546517ab063c354335066e6c073b8c3e0.png) ---
**Author:** ![Macro](https://wowlazymacros.com/letter_avatar_proxy/v4/letter/m/ba8739/32.png) [@Macro](https://wowlazymacros.com/u/Macro)\ **Post date:** [October 27, 2024, 11:54am UTC](https://wowlazymacros.com/t/grizzly-hermit-v5-2-3-updated-10-28/41999/179 "2024-10-27T11:54:55Z")
I too am getting the talents out of date for all talent strings you provided ---
**Author:** ![ApriliaRS660](https://wowlazymacros.com/user_avatar/wowlazymacros.com/apriliars660/32/314_2.png) [@ApriliaRS660](https://wowlazymacros.com/u/ApriliaRS660)\ **Post date:** [October 28, 2024, 12:58pm UTC](https://wowlazymacros.com/t/grizzly-hermit-v5-2-3-updated-10-28/41999/180 "2024-10-28T12:58:35Z")
I just used wow heads newe ones and its fine. Hermit I have the one shot macro setup the Lunar thrash it seems slow to fire. I have to rewatch your videos but what it your main pull priority? Some higher keys I am starting to get 1/2 hp hit right way. ---
**Author:** ![Hermit](https://wowlazymacros.com/user_avatar/wowlazymacros.com/hermit/32/20606_2.png) [@Hermit](https://wowlazymacros.com/u/Hermit)\ **Post date:** [October 28, 2024, 1:30pm UTC](https://wowlazymacros.com/t/grizzly-hermit-v5-2-3-updated-10-28/41999/181 "2024-10-28T13:30:43Z")
Ok so the talents and new build for all three macros should now be updated in the original post. I added a fourth sequence to the AOE that keeps a swipe as it was requested, I left barkskin in it to keep it as close to the previous version as possible for those that liked it better. Let me know if there are any issues with importing them again. > [@ApriliaRS660](#): > > Hermit I have the one shot macro setup the Lunar thrash it seems slow to fire. I have to rewatch your videos but what it your main pull priority? Some higher keys I am starting to get 1/2 hp hit right way. Just to make sure we are on the same page that is an in game macro and not a GSE one. I apply it to a button that uses AHK (I use 3.) I tend to charge in and than hold 3 once LB goes off I switch to the Hermit macro. I was going to just use LB itself on key 3 but the addition of Thrash is there just in case I hold the button too long or in groups where I am having threat problems although its always good to get it rolling for mitigation and dot healing. As far as getting hit for half your life I started to experience that around the level 8 key range. LB can help otherwise in a fortified +10 you are likely to need to pop a cd like Survival instincts before running in or you can use the no barkskin version and use barkskin on pull instead. Alternatively you can pull the previous pack into the next pack when they are low health. While you will take increased damage from more mobs, your Ironfur stacks won’t fall off, your rage won’t deteriorate, and you will still be getting healing from moonfires and thrashes on your previous targets. Just be sure not to turn your back to the mobs but strife so you don’t get hit with crushing blows or loose your dodge. Bears like Paladins have this problem because it takes time for us to get our defensives rolling with moonfire only hitting 1-2 targets depending on if you are pulling with it, thrash needing time to get to three stacks and needing rage to get to 3 stacks of IF. > [@Silverwebb](#): > > only problem is talents, ST, Raid, M+ etc kept saying out of date and unable to import. can you update those? something changed on those talents from wowhead. > [@Macro](#): > > I too am getting the talents out of date for all talent strings you provided I don’t know what changed as I don’t see anything different. It might be an error in the way I hide it in the post. Lets try this for the M+ build. If something doesn’t work I’ll know what to change or if I just need to re-export builds because the string changed on Blizz’s end. Ok it looks like it was something that changed as the test strings are working fine. I’ll add the strings here and than modify the top post. If the talents look a bit different I changed some a bit in the Mythic talents to pick up another charge of SI as you start to need it in +10’s. > **AOE/Mythic Talents** > > ```auto > CgGAvcQZXENQPQXqed372Hg2KCAAAAAAAAAAAAzMzMMzyMjZMjZGLMzwsYZAmBMzMT0MzMMzYWMsxAAAAAAAwYALbzshxsMCMFAACwGzMDA > > ``` > **Single Target/Raid Talents** > > ```auto > CgGAvcQZXENQPQXqed372Hg2KCAAAAAAAAAAAAzYmxMzyMMMjZGLMMzsYZAMgZmZimZmZmZGDDbMAAAAAAghZGwy2MLYMbjATBAgAsxMzAA > > ``` > [@Firedevil](#): > > Works great only thing i would change is barksin out of rotation and just on use for when needed That would be in version 3. Open GSE \> Sequence \> GH\_AOE\_5.2.3 \> change default from 2 to 3 \> Click save. ![image](https://wowlazymacros.com/uploads/default/original/3X/e/9/e96581871e09f7b8ff7d77914df167512e936dc0.png) > [@Firedevil](#): > > Certain ms you have this set for? 250 or less just wondering 250 should work. I run it around 100. To get the best results you will need to test it as it changes based on haste and such. ---
**Author:** ![hyunah4416](https://wowlazymacros.com/user_avatar/wowlazymacros.com/hyunah4416/32/22008_2.png) [@hyunah4416](https://wowlazymacros.com/u/hyunah4416)\ **Post date:** [November 3, 2024, 4:13am UTC](https://wowlazymacros.com/t/grizzly-hermit-v5-2-3-updated-10-28/41999/182 "2024-11-03T04:13:44Z")
![image](https://wowlazymacros.com/uploads/default/original/3X/0/3/035b48c6356514eeaf309968a02124524b6c21a0.jpeg) Is it okay to look like this? ---
**Author:** ![Hermit](https://wowlazymacros.com/user_avatar/wowlazymacros.com/hermit/32/20606_2.png) [@Hermit](https://wowlazymacros.com/u/Hermit)\ **Post date:** [November 3, 2024, 10:24am UTC](https://wowlazymacros.com/t/grizzly-hermit-v5-2-3-updated-10-28/41999/183 "2024-11-03T10:24:26Z")
It looks like you might be using a Korean or other non-English version of WoW. If that’s the case, you may need to adjust or translate certain parts of the macro to match your language version. For English clients, each line typically begins with a `/` followed by commands like `cast` or `castsequence`, followed by the spell name. For example: `/cast [@mouseover,help,nodead] Remove Corruption; [@mouseover,harm,nodead] [harm] Moonfire` In your case, I noticed the `|` symbol, which is something I haven’t seen in English macros. This could be specific to how your version handles commands. You may want to try translating commands like `/cast` to your local language or double-checking if your client uses alternative symbols or terms in macros. You can check this by looking up macros in your language and seeing if they use /cast or something else. If you need help you can use ChatGTP to help translate. Let me know if this helps, or if you have any questions on specific commands! If you use an English client however than its an import error. Delete the macros than re-import them. ---
**Author:** ![dsai6714](https://wowlazymacros.com/user_avatar/wowlazymacros.com/dsai6714/32/22749_2.png) [@dsai6714](https://wowlazymacros.com/u/dsai6714)\ **Post date:** [November 3, 2024, 9:38pm UTC](https://wowlazymacros.com/t/grizzly-hermit-v5-2-3-updated-10-28/41999/184 "2024-11-03T21:38:27Z")
How does this work for a lvl’ing guardian druid, say around 50? ---
**Author:** ![ghostedstep](https://wowlazymacros.com/user_avatar/wowlazymacros.com/ghostedstep/32/21442_2.png) [@ghostedstep](https://wowlazymacros.com/u/ghostedstep)\ **Post date:** [November 10, 2024, 1:51am UTC](https://wowlazymacros.com/t/grizzly-hermit-v5-2-3-updated-10-28/41999/185 "2024-11-10T01:51:19Z")
Why is there 0 iron fur usage in the single target macro? I would understand that for the off tank one but not the single target one. ---
**Author:** ![Hermit](https://wowlazymacros.com/user_avatar/wowlazymacros.com/hermit/32/20606_2.png) [@Hermit](https://wowlazymacros.com/u/Hermit)\ **Post date:** [November 10, 2024, 1:12pm UTC](https://wowlazymacros.com/t/grizzly-hermit-v5-2-3-updated-10-28/41999/186 "2024-11-10T13:12:35Z")
Thats weird as it should be using IF in the single target. In the offtank it should replace it completely with maul as a rage dump. I’ll look into it later this week when I get a chance. ---
**Author:** ![ghostedstep](https://wowlazymacros.com/user_avatar/wowlazymacros.com/ghostedstep/32/21442_2.png) [@ghostedstep](https://wowlazymacros.com/u/ghostedstep)\ **Post date:** [November 11, 2024, 2:10am UTC](https://wowlazymacros.com/t/grizzly-hermit-v5-2-3-updated-10-28/41999/187 "2024-11-11T02:10:43Z")
I do not even see IF in the ST sequence the AOE one still works perfectly though. ---
**Author:** ![DangDudeWow](https://wowlazymacros.com/user_avatar/wowlazymacros.com/dangdudewow/32/22966_2.png) [@DangDudeWow](https://wowlazymacros.com/u/DangDudeWow)\ **Post date:** [November 11, 2024, 4:23am UTC](https://wowlazymacros.com/t/grizzly-hermit-v5-2-3-updated-10-28/41999/188 "2024-11-11T04:23:49Z")
Just curious, why is Swipe never used? Or am I just missing it? [Previous page](https://wowlazymacros.com/t/grizzly-hermit-v5-2-3-updated-10-28/41999.md?page=8) [Next page](https://wowlazymacros.com/t/grizzly-hermit-v5-2-3-updated-10-28/41999.md?page=10)