Izzerri Prot Warrior 12/21/2020

[Izzi]

Ok updated. Was pointed out I did not put a loop limit in macro, so I added it, also change macro slightly to help keep ignore pain up more often.

I run all my macros right now at 100ms
talents are 3,2,2,1,2,2,1

deuEgaalsDlrb9lP0WOGJrjldWZGyAuQRjvABa5BKunovuohjX6GuDpirhuuKfcj5HQOQjcuQlkkQnkvu(OkQyKQOsNKKYlffyMaLCtGQ2ju9trHgkjPLQI8uIMkfARqs9vGIwlqfVvkUROAVO(lqHbJ0HvAXq5XQAYKOlt1MLkYNLQgTiDAqVgsy2Q0TPODl53egUO0XHuwUiEUIPlCDsy7sfvJxfoVuH1duP9Jy2InY4wSunWbCY8PtQbgQEkJgbdWmtNoPwgpX4aSrwACVEfdlr0aAaTLgqdOTy5jFvMX62bJXsWVFIa1EYaf1WgzCl2iJBXY2FNGqBkXNUv5xy1RFHj2gAhnfWSzDLOpPq)QC0(bCIjNqbqubaGXbyz7VtqOnL4t3Q8lS61VWeBdTFaNyYjuqi2imoclB)DccTPeF6wLFHvV(fMyBO9d4etoHIyBdCgJBZY2FNGqBkXNUv5xy1RFHj2gA)aoXKtOagaSry8USS93jghnfE9oH2uIpDRYVWQx)ctSn0(bCIjNqt8XduABGqjullqg0eQnivaDglblHilybnHblTSyPXeyHcpSymwEU(QKXyjU)OGXyjQ8BWyS8eS6TymwQQycWVFIGnY4wSS93ji0Ms8PBv(fw96xyITH2rtbmBwxj6tk0VkhTFaNyYjuaevaayCaw2(7eeAtj(0Tk)cRE9lmX2q7hWjMCcfeIncJJWY2FNGqBkXNUv5xy1RFHj2gA)aoXKtOi22aNX42SS93ji0Ms8PBv(fw96xyITH2pGtm5ekGbaBeoyzg4DCYV(ooBKXTyz7VtqOnL4t3Q8lS61VWeBdTFaNyYjulqiagSyCaw2(7eJJMcVENqBkXNUv5xy1R9d4etoHM4JhOm2KEpiucTR6Q3TRMqTmyqtOLI7LXryz7VtmoAk86DcTPeF6wLFHvV(fMyBOD0uaZM1vI(Kc9RYr7hWjMCcnXhpq5lmX2GqjuGUG6Qjuqi2iAc1sfd2DbPjuqi2iAcfeInIMqTuXGDxqmUnlB)DccTPeF6wLFHvV(fMyBO9d4etoHAzWaJ3LLT)obH2uIpDRYVWQx)ctSn0(bCIjNqTmOEx1T5GLNGvpaJXsJjWcfEaWySugE2otr9buuSu1eOibgDWYmW7q1eFg2iJBXY2yt69Wl3SdcTPePBIzEJsFvMZ4aSS93ji0gtHs03BO9d4etoHAzdYMXryz7VtqOnMcLOpPWofA)aoXKtONPUfJBZY2FNGqBmfkr)JKR2pGtm5ekaIkagy8USS93jghnfE9oH2uIxyITroHM4JhOSeVWeBdcLqbbsDenHwkUxoyPQjo43prWgzClw2(7eeAtj(0Tk)cRE9lmX2q7OPaMnRRe9jf6xLJ2pGtm5ekaIkaamoalB)DccTPeF6wLFHvV(fMyBO9d4etoHccXgHXryz7VtqOnL4t3Q8lS61VWeBdTFaNyYjueBBGZyCBw2(7eeAtj(0Tk)cRE9lmX2q7hWjMCcfWaGnchS88ctSnyuXbhS8CKzg1EYaffJdacbelb)wk2RAv4jDUxbuumQyPAVOyjlvf1QY4zOflbBVtRIBW4wSmZvNejVFEHz2nwm4fgDWOILOEtGl21h2ihSuM1F1aBgxDewcM(IImPizh2ihSmtkIurclvdCbxpjbYbhmd

IZZERRI_PROT_WARRIOR

Talents: 3,2,2,1,2,2,1

This macro contains 1 macro version. This Sequence was exported from GSE 2.6.36.

Macro Version 1

Step Function: Priority

Pre Macro: Thunder Clap, Devastate, Shield Slam, Victory Rush

KeyPress: Spell Reflection, Battle Shout, Slam, Shield Wall

Main Sequence: Shield Slam, Victory Rush, Thunder Clap, Shockwave, Demoralizing Shout, Devastate

KeyRelease: Avatar, Ignore Pain, Shield Block, Thunder Clap, Charge, Execute, Heroic Throw

Post Macro: Thunder Clap, Devastate, Shield Slam, Victory Rush

[skjoldborg]

Loving your Arms macro. I slap at top dps every run. Mythic 0 so far. Gonna use this bad bitch on my tank.

[gliberis]

Excellent job!,
both arms and prot spec, i really mean excellent job!
I will try them both more, in m+ and i will inform you if i see something wrong.
Thanks

[Izzi]

ty, I been trying my hand at making macros, Thank you for the positive comments.

[skjoldborg]

Izzi, can you PLEASE make a Frost DK maco?! The ones available are poo.

[jose-rivarola]

best prot macro so far

[Angryoldman]

I am confused and wanted to know if you were tracking that you had talent row 1 selected Devastator and you have it in the macro but devastator is passive, so is it needed in the macro, or was that a left over from a different version. It looks amazing and I am about to test it on a boost character.

[Izzi]

Yeah, sort of lol. I used to make macros just for my wife and myself to use. And I just recently just started sharing macros here and writing them to share with others. So some of the things I do doesn’t make much sense at times, well because I did not say why I put things like devastate in the macro when I say take devastator as a talent which replaces it and makes it passive. The reason I put it in there is if you had to or wanted to use the second talent punish, you could and still have devastate be used by the macro. Since punish adds a single target damage debuff it might be needed for certain fights. I apologize for not sharing that. And leaving devastate in the macro did not effect it so I left it. My bad for not sharing the reason behind why I left it in. Like I said I made this one for my wife’s warrior and used it on mine as well. I will try to do better at sharing the reason why I do what I do in the future. I hope that makes sense and thank you for asking.

[Izzi]

I will attempt to make one for you this weekend. I generally play my DK as blood. But I will see what I can do. I am already going to try to update my rogue macro and a few others. I will do my best to make one for you to try. Hopefully it will be better than poo.

[Izzi]

OK Izzerri frost DK macro is up first attempt let me know

[rico-hetz]

i´m wondering … the macro does not fire ignore pain … shieldblock … shield slam … mmmh

[Izzi]

I am not sure what issue you are having just ran it a few times on two different warriors I had no issue…

[Kong_Kvernhaug]

Can you explain the effectivness of putting the sequence in the pre and post macro with no inner loop?
and last i made macros reset=x value do nothing, did they change that?

[Izzi]

I am sure it was an over sight let me take a look. I try build macros in the morning or in mid ques, there is a chance I missed it . Thank you for pointing it out .

[Izzi]

ok added loop limit thanks again for pointing that out. Also made minor adjustment since I broke it out to fix the loop limit.

[Kong_Kvernhaug]

Ok, but can you explain the effectivness of having the same abilities in pre and post macros as in sequence. As i see it it just does the same thing or?

[Izzi]

It shouldn’t I have just seen, for me, that the spells are more likely to go off. when I put them in just pre-macro or just post, macros starts cycling the main sequence. I just want to make sure they are hitting certain spells as they come up. In this macro I want shield slam to hit as it pops. I found this was the best way that worked for me.

[Kong_Kvernhaug]

Im not sure you would want that in a priority based macro, but ok Thanks for the answers.

[Izzi]

No problem. Like I said it works for me. I hope it is working for others. I am always willing to listen and take an advice. Just started sharing my macros recently, and am fairly new to making them. I am more then happy to take any input on making my macros better. And always willing to answer any question I can. Happy hunting.

[rico-hetz]

The Pre & Post Macro-Function just work with a Inner Loop defined.
The Key-Press & Release Function works also w/o defined Inner Loops.

Inner Loop (e.g. 1) will repeat the Sequence 1 times until it fires the Pre & Post Macro-Function.
E.G. Inner Loop 1:
Pre-Function output =
“let me describe”
“let me describe it again”
“let me describe it again to be clear”

Sequence output =
“macro”
“fire”
“line”
“by”
“line”
“if”
“you”
“choose”
“1 2 3 4 sequential”

Post-Function output =
“understood ?”
“understood now ?”
“understood you really ?”

Macro works like following:

“let me describe”
“macro”
“fire”
“line”
“by”
“line”
“if”
“you”
“choose”
“1 2 3 4 sequential”
“understood ?”
“let me describe it again”
“macro”
“fire”
“line”
“by”
“line”
“if”
“you”
“choose”
“1 2 3 4 sequential”
“understood now ?”
“let me describe it again to be clear”
“macro”
“fire”
“line”
“by”
“line”
“if”
“you”
“choose”
“1 2 3 4 sequential”
“understood you really ?”