Celbone's Shadow Priest Mythic and Raid Sequences - TWW 11.2.7

[celbone]

Hello There Friends,

With you, the sequence for Shadow Priest, Archon and Voidweaver, Builds!

First things first!

Sequence Version 1 (MYTHIC+ → ARCHON)
ALT: Shadow Crash on target or [CURSOR] as you talented it
SHIFT: Mass Dispel on cursor

Sequence Version 2 (RAID CLEAVE → VOIDWEAVER)
ALT: Shadow Crash on target or [CURSOR] as you talented it
SHIFT: Mass Dispel on cursor

VERY IMPORTANT POWER INFUSION USAGE
I do use a macro to get the name of my PI target, that said, the macro I use for it have 2 parts:

• 1st to collect the name and 2nd to use PI with that collected player’s name.

How to use it

1. Copy and paste the macro below:
   1.1.

/run local n=UnitName("target") or "player" if not InCombatLockdown() then EditMacro(GetMacroIndexByName("PI"),nil,nil,"#showtooltip\n/cast [@mouseover,help,nodead][@"..n.."] Power Infusion\n/cast Power Infusion") SendChatMessage("PI target is "..n) end

2. Select your PI Target, click the MACRO you created above, it does need to be in your action bars somewhere, now [PI] usage macro will have that player as main target and no mouseover exists, it also say the player’s name for everyone out there.

3. Now, you gotta have this macro for actual usage of [PI], and you need to name it “PI” (without quotes), save this macro as new, it’ll be your Power Infusion button, also need to be in your action bars somewhere.

#showtooltip
/cast [@mouseover,help,nodead][@] Power Infusion
/cast Power Infusion

What happens all the above? Macro 1 will collect the name of the player, no matter what that name is and what characters the player used, very easy to pick a target that way, it will also edit the macro created as “PI”. Macro “PI” will use Power Infusion on that collected target, if that target is not available you can mouseover a new target whe pressing the button where your “PI” macro is, if none of those options is available, then the macro will cast Power Infusion on you.

Actual Gear (JAN.05.26)

The Sequence:

!GSE3!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

Talents for:

Sequence version 1 - MYTHIC PLUS - Archon:

CIQAJVmtV83otBfEj5bt80waBMMjBAAAAAAAAAAAAjxygZmZbZjZmZmZGLwsxMzMMbjZDjxwsY2mamBLYGgZ2sMa2MAkxYBAWM

Sequence version 2 - RAID/CLEAVE Voidweaver:

CIQAAAAAAAAAAAAAAAAAAAAAAMDmZAAAAAAAAAAAAYM2YMzMLbGzMmZmZWGMbMzMzY2YgxYYWMbTNzgFYmZAgAMbz2SwsxCglZA

This is it folks, let me know how it goes, feedbacks are always welcome.

Enjoying so far? How about support the work?
By Me a Coffee!

[Cronnax]

The Archon version works perfectly for me.
But the 2 other versions have some issues, it just start doing something, and then just stops and pauses for a long time, before doing anything again. so long that the details meter resets

[celbone]

Hi Cronnax,

May I ask for more information?

What are your MS ?
Can you share your Details log hitting a dummie ?
Did you reloadui after changing specs?
Have you changed the option for default version under GSE sequence page?
(dum question) Your GSE is updated?

Thanks in advance mate, as soon as you get me those information I’ll work on this issue.

[celbone]

@Cronnax thanks for your feedback

Updated posted!

Changelog:

Sequence Versions 1 and 2:

• Was able to recreate what was stoping the sequence, got it fixed;
• Reordered the casts and added conditions to verify PROC versus NON-PROC version of some spells;
• Vampiric Touch is still out of the sequence, it was not doing good in there, manually apply and reapply it.

Sequence Version 1:

• A small tunning for better rotation.

[Xerraphim]

Hey there - just some initial feedback and THANKS for your work on this

I want to get this macro working because I have a complex fight atm I could use with the mental downtime lol.

It doesn’t seem to use Vampiric Touch at all in your [3] sequence. I can’t see it in the sequence code either. I see you answered this above - the problem with that is that it’s a huge DPS loss as isn’t just used on cooldown. Wonder is there a way to fix that.

It also fails to use Shadow Word: Death in a timely manner.

For context, at 142ms, this does between 1/2 to 1/3 of my sim damage on a ST.

[celbone]

Hi @Xerraphim,

My sequence does not include: Vampiric Touch nor Shadow Word: Death!

Why is that? Well, dps wise those are the most situational spells in your card, you should pre-cast Vampiric Touch before pull and if using sequences v2 and v3, whenever you need an opener, a filler or a refresh. Same idea works for Shadow Word: Death, as you need to cast it when insanity needs a refill or to execute during burst.

Btw, v3 does includes Shadow Word: Death on ALT modifier, with extra condition for mouseover.

The way Shadow Crash works now, it is easy to miss some mobs during a pull, so I use VT out of the sequence to mouse over and apply dots, and SWD for me is only on execute, therefore I have it on one of my buttons for a hard cast situation.

[fragnot]

Its of no use, to include a 3 min dummy result, if you dont include the same 3 min fight result from raidbots for comparison.

[celbone]

Hi @fragnot ,

Hope everything is going ok, about the comparison, in all my builds the sym from raidbots are oscilating from 87% to 93%, I only post the dummie testing to get the details log as evidence that the sequence is working. Testing it during a dungeon run or similar situation is the best anyways, right? At least for me, that is what makes sense. If for you the raidbots or other kind of comparison is what makes more sense, please be my guest and test it for yourself, let us know how it went.

Anyway, figure it would make no harm to run a quick sim and clear it out right?

Cheers!

[Cronnax]

Okay, so i have tryed it for a few days now, and my raidbots sim says my char should be able to do 4m dps over a 3 min test.
When i test on dummies for 3 min i get 2.17m.
Can you share how u set up your gse? AutoClikker or binding to a keybind on mouse for macro or keyboard for pressing manuel? and do you have ActionButtonUseKeyDown Checked or unchecked?
Would you be able to share a bit about how you do for getting 87-93% of sim?
And what ms you using?

[celbone]

Hi @Cronnax,

GSE configurations for me are rather basic:

1. All options reset on out of combat (except the key combinations) are checked
2. KeyDown is unchecked
3. Keybind is set for MOUSEWHEELUP, linking sequence+talent
4. MS set to 200 (a safe limit considering the amount of iterations the sequence will execute, respecting the 319 max)

[celbone]

Update posted!

Changelog:

Version 1 - rotation improvement, now Void Bolt cast increased;
Version 1 - Trinkets usage were removed from the sequence, until I get the prime BiS, I’ll not add it;

Version 3 - Fixed some hickups and rotation stucking after Dark Ascension.

Issues I’m working on:

Version 2 - Mind Spike and Mind Spike: Insanity are not being cast at all, this kinda happened after the GSE last update, still trying to figure out what it is;

[Horvath_Attila]

On version 1 after a time the macro just stops, after pushing some buttons myself it goes on.
On a 3 minute testing it stopped 5 times.

And with a gear of 647 i cant go above 1 mil of dps on a target dummy.

[celbone]

Hi Horvath,

Do you mind sharing the log? And if possible, the report from an addon called SImple Spell Tracker?

I can check what is happening with you, just for the record, I’m using this macro on keys 6 to 8 with no problems so far.

Btw, have you did a quick check on keybinds ? Some times ALt something is a keybind already existing and that stops the sequence rotation a bit.

For version 2, I’m still trying to figure why Mind Spike is not firing at all.

[celbone]

Update Posted!

Finally was able to figure out why the sequence version was not firing skills!

I’m really dumb!

For whatever content you doing, please change TALENTS and VERSIONS before using the automation:

Changelog:

All Versions: Picking the right version according to talents using, everything will work as it should.

Versions 2 and 3: Rotation improvements for both, RAID talents still very dependent on Gear, the DPS overall is 900k-1M on single target dummie and it is very close to the simulation

[celbone]

Hello there folks, updated version for Shadow Priest TWW 11.2.7 and still testing for Midnight.

[Wownerd]

just tried testing the updated version, but the talent import didn’t populate all of the talents. When I went ahead and used the top Archon build anyway, I still couldn’t get the attack sequence to run. I was testing the Mythic+ version specifically.

Has anyone run into this before or have an idea what might be causing it? Thanks in advance.

[celbone]

hi there mate, let me ask for more details on this.

Were you able to import the sequence ? Do you se bouth ST and AOE versions ?

When importing the talents from other sources, are you creating the KEYBIND and merging SEQUENCE with TALENT LOADOUT?

Are you using the sequence version for the talents you have on? Meaning, AOE for Archon and ST for Voidweaver?

After all that, are you trying a /reload ?

[Wownerd]

I was able to import the sequence (i copied the string you have) but i only see “celbone_spriest_pve_raid” no ST or AOE versions. I’m sure this is where i’ve gone wrong.

I just deleted and re-imported but i had the same results.

[celbone]

I see, you are not able to expand the sequence “celbone_spriest_pve_raid” ? It should show you a + sign right beside it, sorry for asking this basic, not mean to be harsh nor anything like it, just asking for the sake of understanding.

I did open this sequence at the GSE Builder tool now, it seens ok to me.

Also, did a quick re-import on my wow client yesterday, was able to see both versions under the sequence container

You’ll be able to see the versions, after expanding the sequence container, like this:

(screenshoot from GSE guide videos)

Please, note that you need to change the default VERSION according to each talent loadout you using:

After changing talents and changing the default version, please run a quick /reload on your wow client, it will set the correct behavior on GSE according to your previous configurations.

[Wownerd]

Thank you for following up. I was able to expand “celbone_spriest_pve_raid” and see both the ST and AOE options. From there, I selected the AOE option under Default Version and successfully bound “celbone_spriest_pve_raid” to the E key.

What I’m trying to figure out now is how to bind the ST version to a separate key without having to change the Default Version to ST, which would overwrite or break the existing AOE bind.

Thanks again for your patience and for taking the time to help.