When the aoe one locks up for me, I just hit the single target for a second and switch back with no issues.
This is by far the best elemental macro on this site. PLEASE keep it updated for season 2. I’m having so much fun playing this class.
I am currently working on updating this for 11.1
All comments before this were pertaining to the previous build for season 1.
I have finished the mythic+ build and Aoe Sequence, and am working on the ST w/Cleave build and sequence.
With the talent changes, I might end up having to do 4 total sequences. a ST&AOE for both mythics and raids.
3 Likes
curious at to why
the macro is pumping as is
Yes, the macro is working really well. But as he states, it´s a mythic+ build and optimized for that rotation, when it comes to SingleTarget raid, this macro isnt very optimized, the AOE is also not fully optimized, there is always room for improvements. With that, its NOT a complaint, it´s fact and he has done a awesome macro (please see my comments before)
Registered now, just to say thank you. Tried you M+ now, INSANE dps!
Thank you mate, keep up the good work!
1 Like
Dionysus37: You missed to add the import strings on the top post for Singletarget / Cleave build + the GSE import 
Edit: My bad, just noticed you are working with the ST Raid.
Ok I got it about as good as I’m going to for now. I’m really not liking all the rng that has to come into play for farseer to see really good numbers using a sequence.
It seems to me that you have to hold back spells and use them at just the right times when you get ancestor procs, and that’s not something that GSE does well.
I was able to get the mythic+ sequences doing really well, but the raid sequences are anywhere from 70 - 80% of sim.
I’ll come back and work on it again some time in the future, after I get my other class sequences updated.
Good job so far! I did some testing on your M+ ST/AOE macro. I haven´t found the reason yet, but the issue is once again there when no attacks are being made, and this is even IN combat. Example, I was throwing the AOE macro, then there was one mob left, I switched using the ST one, it casted a lightning bolt, then was still and didn´t do anything, waited probably 3-4 seconds then I had to start using skills manually.
I haven´t found yet, what makes it stop, because it´s fine switching between the ST and AOE macro usually, but it happens more often now, probably 5-6 times last night when questing in Undermine
That could very likely be due to server lag, and how there is a lot of it in the new zones right now. @TimothyLuke was posting in the discord about server lag and how it can create issues in GSE.
Might be correct! I hope you do find out the issue on your farseer SIM, like I said this has been so far one of the best macros out there.
Heyas
The 1st macros that are all stormseer
im 618 atm
st- 1.11
AE- 3,5
the most recent
ST farseer- 890k
AE-3.5—
the difference between AE1 and AErecent im noticing that AErecent takes longer to stablize, while AE1 hits it max damage faster.
Dionysus37: So I did some additional testing in groups today (m+). There is something wrong with your ST mythic+ macro for sure or I´m just very unlucky/lucky?. It kept getting stuck over and over again, so I had your old macro stored, changed the keybinding so I was using your old ST, and it did not happened a single time, but the new one, it happened over and over again. I´m wondering if the issue actually is lag, since the old macro it did not happened even once.
I can say, standing on a dummy, it does not freeze as much what I can find, but you should really take the macro into group dungeon and check it out, not sure if it´s actually field tested?
I confirm as well, ST often freezes.
Yep, did last wing of LFR last night with this (M+) sequence… on court everything was fine (using mostly the MT sequence), then on Queen the ST worked for a couple of seconds… then it hang for the rest of the fight, so I ended up using the MT sequence pretty much the whole fight lol
hmmm I tested it in a normal palace run Wednesday Night and didnt have any problems with it. Not sure what it is that could causing it to freeze up for you guys.
One thing that I tend to do when I’m having issues with a sequence (for any sequence) that hangs, is I delete my spell cache. I know there are issues with spell id’s like I’ve stated in the past.
I just finished up my paladin sequence, and have been going through all of the new undermine content with it since my paladin is 639 ilvl. Now that I’m mostly finished with that, I’ll check back on this one and see what I can do before I jump on any of my other sequences.
Same issue for me sadly - AOE works fine - ST Stucks - sometime /reload helps…
Maybe u find the issue -
And mine don’t switch to the next target when a mob died … have to switch manually …
any ideas here ?
Keep up the good work
Yepp! I did some additional testing today, with the old ST/AOE macro, it worked fine all the time in each m+ dungeon I did, but with the new ST m+ macro it really did get stuck almost every pack, and yes /reload helps, but you needed to do it for each pack and missed like 70% of each fight, so there is definitely a issue with the latest macro.
Updated all the import strings after making a few changes. I think I know what the problem was for you guys and why I wasn’t seeing it.
I had a castsequence set up for lightning bolt and lava burst so that lava burst never got cast twice in a row and waste the dmg increase that it gives to a nature/phys/frost spell, and with my stats i never saw an issue where i was out of lava bursts when it was trying to cast one. I also had a lightning bolt at the end of the loop as a fallback filler option in case of the sequence hanging on a spell that was on cd (I do this with most of my sequences).
Well I realized that the loop was long enough that if the lava burst was on cd, it could lead to a lockup since the extra lightning bolt block was at the very end of a 9 block loop; meaning it could take quite a while for it to loop all the way around to it.
Basically it comes down to the fact that I still don’t know why it was freezing up on you guys, but I could see at least 2 potential issues that might be the cause of it, so - hopefully - I fixed it.
With changing the logic of how the sequence works, you could see issues where stormkeeper or storm elemental dont cast on cd like i want them to. I could fix that issue, but that’s what all the combat checks were for last season that were causing other lockup issues.
test it out and let me know if it’s working for you, or if it’s still having problems. I’m going to update the plugin as well with this build for those of you updating through curseforge.
2 Likes
Dude, this is a proper DPS Macro. It’s doing double, if not triple sustained DPS, than other macro I was using on single target. The AOE one is outrageous, 5 to 6 mill on Ascendance, with a 2 to 3 mill sustained, unreal. I was wondering why everyone was saying Elemental was op AF, Now I’m seeing why, Great freaking work.
2 Likes
I´ll test it out tonight in some m+ runs. Thanks for the update!