Mythic+ Elune's Chosen - Balance

I wanted to try to make a Balance Druid mythic+ build for Elune’s Chosen because there was not really one available. I can see that a few people have made sequences, but they are mostly geared towards open world and raid content. Most people I have seen are primarily using the one-button assistance system from Blizzard.

Because of that, I wanted to create a sequence that can either rival the one-button assistance or at least perform better than it. Below is what I have put together so far. Feel free to test it out, try it on target dummies, and compare it directly against the Blizzard one-button assistant.

There are two modifiers in this sequence. The first is for Wrath. When you are doing single target, you should hold ALT, which will cause Wrath to be used instead of Starfire. In mythic+, you generally want to use Starfire for AoE situations, but when fighting a boss you want to focus on Wrath for single target damage. This helps avoid spending time casting AoE abilities when a faster single target cast is more efficient.

The second modifier is for Eclipse. Be aware that Eclipse has two charges, so it is worth monitoring how it behaves in practice. If it ends up consuming both charges too quickly, let me know and I can adjust or remove it. This is also why I did not place Incarnation: Chosen of Elune into a modifier, since it also has charges and I was concerned it might be consumed too quickly when combined with rapid modifier usage.

If anyone knows how to structure a sequence so that it only uses a single charge at a time more reliably, that would be very helpful.

Please try it out and let me know your feedback. If it is not good, please tell me. If it is decent, or even just needs improvement, any feedback would be appreciated. The goal is to refine this into a strong mythic+ Balance Druid sequence that can compete with or improve upon the standard one-button assistant.

Sorry for the long message. The sequence is below. Have fun testing it. The talent build is also included below for reference.

Sequence:

!GSE3!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

Modifiers:

Ctrl: Lunar / Lunar Eclipse

Alt: Wrath

Build:

CYGAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAWoMbNMmZgxsMzMzMLMgZZmlZWMzMWYZmlxMjxGGAMW2mZwY2GBmAAAAswMzMD2MmxYAAYmBGA

2 Likes

All right, after testing it myself and playing around with it for a bit, I have noticed a couple of issues.

For some reason, Sunfire is not firing off when it should be. In addition, the Wrath modifier seems to be completely overriding everything else. When I hold the modifier, it just spams Wrath repeatedly instead of continuing through the rest of the sequence as intended.

I need to figure out a way to make it so that Wrath is only used when the modifier is held, but still allows the sequence to continue progressing through the rest of the abilities normally.

I am still fairly new when it comes to creating sequences, so I am learning as I go. Hopefully, I can continue tweaking this and improve it over time as I gain more understanding of how GSE works and how to properly structure these kinds of rotations.

2 Likes

Ok I’m going to get this druid to 90, then I can finally get time to go through everything :smiley:

3 Likes