NightFae Fire Mage Single target Rotation


Usage Information

Once you practice your ALT Pyroblast timing, you will be able to burst 7K damage and keep a constant 3K. It will improve with better gear, etc. I also use ConRO to show me when to hit the ALT… now I have it more intuitive.

This macro contains 1 macro version. This Sequence was exported from GSE 2.6.39.

Macro Version 1

Step Function: Sequential

Pre Macro: Mirror Image

KeyPress: Pyroblast

Main Sequence:
Fireball, Combustion, Fire Blast, (ALT) Pyroblast, Fire Blast, (ALT)Pyroblast, Phoenix Flames, (ALT)Pyroblast, Fire Blast, (ALT)Pyroblast, Phoenix Flames, (ALT)Pyroblast, Phoenix Flames,(ALT)Pyroblast, Fireball, Scorch

KeyRelease: Blazing Barrier

1 Like

Hi. I willl try this tomorrow. What Weak Aura are you using? Could you link it in here?

Hi Stephen,
Thanks for giving it a try. I fixed my typo. It was not weak auras, it is ConRO
Look forward to reading the feedback.

Thanks so what are your settings for CONRO? Full? Burst? also AOE? or Single? Or do you change depending on the encounter?

I have ConRO set with full and Single.

This is a good marco. But i wanted to know if running at 60MS is safe? I read that most recommend not go below 100ms.

No, do not. There is a chance running anything below 150ms can result in a ban.

1 Like

Hello all,
I am manually pressing the buttons. But if you have a tool to press for you, I suggest 100ms. This what I have seen as the standard timing and makes the math easier – 10 pushes equals 1000ms or 1 second.

Wrong!!! Man Times asked!!!

Hello all.
I’m not sure what is being asked as I am new here but
I press the button manually on average 65ms per click (I get tired after a while). There are 14 events (button pushes) counting all the pre, main, keyRelease, and post to go through the macro top to bottom. Not count Alt Pyro.
14 x 65ms = 915 ms. I have three fire blasts (12 seconds cooldown), three phoenix flames (25 sec cd) Combustion is 2 min CD. That is why I have Fireball and scorch when the sequence has everything in cool down.

Does that answer the question? or am I missing something?

Hammer that was not for u.

ah, thanks… but I thought I would give my thinking on why I built it in the order I did trying to get the timing right

Not wrong, its automating a button press. It has been checked times over. Go ahead and wait for that ban.

1 Like

Why are you so toxic? ive been using these macros for YEARS between 20-100ms. Seriously stop talking rubbish and just get on with playing the game.


running at 250ms? wow. I was using 100ms and was wondering why the dps is so low

Rules change over the years. Like this year, where it changed from allowing multi-boxing to it now being a bannable offense. Pushing a button an inhuman amount of times can lead to a ban. It has been confirmed by support many times in other threads and on the WoWLM discord.

1 Like

To be clear, I said on average because I am pressing the button and paying attention to see if I crit.
fireball, combustion, fireblast, ( do i have a crit? Yes= Alt pyroblast, No=continue sequence) … etc
so I really can’t give a specific timing… however I do have a sequence that will support a specific timing. Let me know what you think:


Usage Information

This will stop sequencing until combust is off cool down after the first pass of the whole macro.

This macro contains 1 macro version. This Sequence was exported from GSE 2.6.42.

Macro Version 1

Step Function: Sequential

Pre Macro: Mirror Image

KeyPress: Greater Pyroblast

Main Sequence: /castsequence reset=target Fireball, Combustion, Fire Blast, Fire Blast, Pyroblast, Pyroblast, Phoenix Flames, Pyroblast, Fire Blast, Pyroblast, Phoenix Flames, Pyroblast, Phoenix Flames, Pyroblast, Fire Blast, Pyroblast, Scorch, Scorch, Fireball, Fire Blast, Pyroblast, Phoenix Flames, Pyroblast, Scorch, Scorch, Fireball, Fire Blast, Pyroblast, Fire Blast, Pyroblast, Scorch, Scorch, Fireball, Phoenix Flames, Pyroblast, Fire Blast, Pyroblast, Scorch, Scorch, Fireball, Fire Blast, Pyroblast, Phoenix Flames, Pyroblast, Fire Blast

KeyRelease: Rune of Power, Blazing Barrier

It’s only a matter of time until someone catches you. It’s a ban-able concern. You’ve just been lucky so far.

1 Like

Please can someone help me understand if possible?

If this is a Night Fae Fire Mage macro
and as mages we have “Shifting Power”
why does the macro use “nochanneling” for its cast routines?

please understand this is not a dig or a moan, i need to understand if i am missing something here?

many thanks

why do this not show up when i try to edit the macro?
but it does cast rune of power just not shifting power?